Setting new standards in charger performance!

Triton 2 EQ

Everything that makes the Triton2 great is on the Triton2 EQ -- and then some! In addition to 10 battery memories and the ability to monitor heat-sensitive batteries with the optional Thermal Probe (GPMM3151), the Triton2 EQ features a built-in LiPo balancer, the convenience of a built-in AC power supply, compatibility with the latest battery technologies such as LiFe (A123) cells, an adjustable-angle LCD and an increased charge current of up to 8 amps!


1 year warranty
  • For LiPo, Li-Ion, LiFe (A123) NiCd, NiMH, and Pb batteries
  • Includes built-in balancer for up to 6S packs
  • Fast charge up to 8 amps
  • Built-in balancing for 1-6S LiPo, Li-Ion, or LiFe (A123) cells (ElectriFly and FlightPower adapters included)
  • 0.1-8.0A adjustable charge current
  • Precision peak detection with adjustable sensitivity for NiCd and NiMH batts
  • Constant current / constant voltage charge method for Pb and lithiums
  • Temperature sensing capabilities (GPMM3151 Thermal Probe available separately)
  • Top-off charge feature fully charges NiMHs without overheating
  • 0.1-3.0A adjustable discharge current
  • Adjustable discharge cutoff voltages for NiCd/MH, preset voltages for Pb and lithiums
  • Perform 1 to 10 cycles (NiCd/MH only), and recall all data
  • Configure up to 10 batteries in memory for instant, easy recall and charger set-up
  • Banana plugs on DC input, and includes mating alligator clips
  • Displays input and output volts, peak volts, average discharge volts, charge and discharge capacity, currents and time, data for 10 cycles, errors, and individual lithium cell voltages
  • Audible sound cues aid in programming and notification of function changes.
  • Warning messages for improper input voltage, poor connections, unsuitable battery condition, reverse polarity on output
  • Safety features include cool-off time delay, maximum NiMH charge input, fast charge safety timer, current overload and reverse polarity protection

Triton EQ 2
Triton EQ 2
Triton EQ 2
DC input makes the Triton2 EQ portable; a compact, built-in switching AC power supply makes it handy for indoor charging as well.
Balancing capability for up to 6S lithium packs is built in, so it's equally useful for the smallest indoor fliers as well as big outdoor aircraft.
  Not only is the LCD reversed with a backlight, it also features a 0-45 degree adjustable view angle for easy reading.

Stock number: GPMM3156
AC input voltage: 110V 60Hz -- 240V 50Hz
DC input: 11-15.0V, banana plugs with mating gator clips
Number of outputs: one
Battery types, # cells: 1-24 NiCd, NiMH (1.2-28.0V)
1-6 LiPo, Li-Ion, LiFe (3.3, 3.6 or 3.7V cells)
6, 12, 24V Pb (2V per cell)
Fast charge current: 0.1-8.0A linear NiCd, NiMH, auto mode
0.1-8.0A for lithiums and Pb (120W max DC, 100W max AC)
Fast charge termination: peak detection for NiCd, NiMH
cc/cv for Pb and lithiums
optional thermal cutoff for all battery types
Fast charge safety timer: 0-990 minutes
Discharge current: 0.1-3.0A
Discharge cutoff voltage: 0.5-1.2V per cell NiCd/NiMH
2.8V per cell LiPo/Li-Ion
2.5V per cell LiFe
1.8V per cell Pb
Battery memories: ten
Programming controls: dial, 2 push buttons
Display type: 2x16 reverse LCD w/backlight and adjustable angle
Audible indicators: 10 melodies, on/off
Case material: aluminum and ABS plastic
Thermal cutoff: 50-150°F (10-65°C)**
Safety devices: solid-state overload
Cooling fan: built-in
Case size: 7.2 x 7.0 x 2.4 in (184 x 178 x 62 mm)
Weight: 39.4 oz. (1116g, w/o AC power cord)
NiCd/NiMH Specs
Trickle current: 0-300mA
Peak sensitivity: 5-20mV NiCd/3-15mV NiMH
Peak delay at start: 0-60 minutes
Cycle count: 1-10 cycles
Cycle delay: 1-60 minutes
Maximum charge cap: 0-9900mAh
NiMH top off charge: 0-1000mA
Lithium Specs
Balancing accuracy: 5mV per cell
Balancing connector: FlightPower and ElectriFly adapters included
Maximum node current: 300mA

** requires optional Thermal Probe (GPMM3151), sold separately Thermal Probe

AMA Safety Recommendation